Real completed jobs from our crew across San Diego, Riverside, and San Bernardino counties. These July and August 2026 jobs include pump replacements, diagnostics, pressure-tank work, and control-panel repairs.
📍 El Cajon
Cleared overcurrent and dry-well faults, reseated loose contactor wiring, and confirmed the 1 HP well and booster were running in range.
📍 Bonsall
Replaced a failed drive with a new variable-frequency drive, ran new transducer cable, and programmed the controller.
📍 Menifee
Replaced the bottom pump-down float and cycled the tank controls. The well cut in and out as designed.
📍 Alpine
Replaced a burned run capacitor after overcurrent trips. The well started and ran normally; set a 50-minute pump-saver off time.
📍 Aguanga
Replaced a 40/60 pressure switch with melted contacts. The 86-gallon tank was still good and the system cycled on the right psi.
📍 Santa Ysabel
Unclogged house connections and the pressure-switch port on a high-iron well. Confirmed the well and booster were running; the storage tank is due for replacement.
📍 Rancho Santa Fe
Reset a tripped 125-amp breaker and tightened loose connections. The household well came back online.
📍 Aguanga
Replaced a 40/60 well pressure switch. The well was pulling normal amps and the booster will run on its own once the tank finishes filling.
No projects found for this filter.
From emergency repairs to new well drilling, our team is ready to help.